Miele A 620 Gebrauchsanweisung Seite 44

en - Areas of application
44
 Damage to the items.
The rims of the items should rest fully on the support of the injector
nozzle. If items dislodge neighbouring nozzles, damage can occur
during reprocessing, for example, the items may become scratched
or the glass may break.
Use:
– A different position on the module
– A module with a greater distance between the nozzles
The tip of the nozzle is designed so that it can touch the bottom of a
piece of glassware during reprocessing. The shape of the protective
cap ensures that water can flow out of the nozzle during repro-
cessing.
 Damage to the items.
If items are reprocessed frequently, their surfaces may be damaged
at the point where the nozzle touches them, for example, the items
may become scratched.
If the items are fragile, select a shorter nozzle to prevent the nozzle
from coming into contact with the item.