Klarstein KEMBU 2L Bedienungsanleitung Seite 29

screen. It shows that the operaton has started.
Hour/minute button
You can use these two buttons to adjust the preparation time.
A The time of preset modes can no longer be changed once the preset button
is pressed. For more information about these function modes, see the 'Preset
Function Modes' section.
B For modes where the time can be adjusted, the operating time can be adjusted
by selecting the function menu and pressing the hour button H and the minute
button M.
Example
Follow the steps below to adjust the operating time of the steam function. For
example
1. Keep pressing the menu button until the 'steam' mode is selected. The
relevant steam cooking mode indicator light will illuminate and the H and M
buttons will flash.
2. The hours can be increased by pressing the H button and the minutes can be
increased by pressing the M button to the desired operating time.
3. If no button is pressed within 5 - 7 seconds after setting the time, the device
will enter the operating mode automatically.
Attention: If you want to adjust the time for a preset function mode, the
preparation time must be adjusted before pressing the preset button. The
'adjustment of all function modes' table shows the respective preparation time for
the individual modes and shows whether the time can be adjusted or not.
Example
If you want to set the steam cooking time to 90 minutes and set the end of cooking
time to 2 hours, you can do it by following the steps below:
1. To select the 'steam' cooking mode, press the menu button repeatedly. Once
the steam cooking mode has been selected, the relevant indicator light, H and
M buttons and 'preset' will flash.
2. Repeatedly press the M button to increase the preparation time to 90 minutes.
3. To start the preset function mode, press the preset button. The preset time is
displayed on the screen.
4. Press the H button to increase the preset time to 2 hours, which is the time
the cooking is supposed to be finished.
5. If no other button is pressed within 5 - 7 seconds, the device will automatically
switch to the operating mode.
EN
29