Werbung
You can connect any two identical mo-
dels as follows using the side-by-side
installation kit:
– KWT 6312 UG(S)
– KWT 6321 UG
– KWT 6322 UG
Models KWT 6312 UG(S) and KWT
6322 UG can also be connected.
Before installation
To avoid the risk of personal injury
or damage to the appliance, it is
essential to read these installation
instructions as well as the Operating
instructions for your appliance befo-
re it is installed and used for the first
time.
Caution!
This appliance must be built in, ot-
herwise it could tip up.
It is essential that all installation work
is carried out by two people.
Depending on the niche, the following
parts may be required for side-by-side
installation:
– Connecting bracket with securing
tab a (connects appliances under a
wooden worktop)
– Connecting bracket without securing
tab b (connects appliances under
worktops which cannot be screwed
into)
– Connecting bracket c (connects ap-
pliances on the front at the bottom)
– Connecting clamps d (connects ap-
pliances at the back)
– Screws for the connecting clamps e
– Screws for securing the connecting
bracket f
AU/en
3
Werbung
