Hama 00136692 Bedienungsanleitung Seite 5

Risk of electric shock
• Do not attempt to service or repair the product
yourself. Leave any and all service work to
qualified experts.
• Do not open the product. Do not continue to
operate the product if it is damaged, which may
be indicated by smoke, odour or loud noises.
Immediately contact your dealer or our service
department (see item "Service and Support").
4. Proper use
The jump starter can be used to start a vehicle
with an empty 12 V car battery. For starting diesel
engines with a maximum capacity of 3 litres, or
petrol engines with a maximum capacity of 5 litres.
The integrated USB output allows charging of mobile
devices, such as a tablet or smartphone. Includes a
LED work light with continuous light, stroboscope
and SOS function.
5. Jump starter
5.1 Charging
• Charge the device before starting it up for the first
time. Connect the included Micro-USB cable to the
USB input (2) of the jump starter and to a suitable
USB charger (at least 5 V / 2 A ; not included in
delivery package).
• Alternatively, use the supplied 12 V USB vehicle
charger to charge the device via the cigarette
lighter connection of your vehicle.
• Charging begins and ends automatically.
Note
• Do not leave the device unattended for a
longer time period during charging!
• Charge the jump starter fully before using it for
the first time.
• To jump start a vehicle, the jump starter must
be at least half charged (at least two of the
four battery status LEDs (2) are constantly lit).
5.2 Preparations
• Make sure you observe the jump starting informa-
tion in the vehicles' operating instructions.
• Pull the parking brake on the vehicle.
• Put the gear lever into neutral position, or, in
the case of an automatic gearbox, select the P
position.
• Switch off vehicle ignitions and all consumers.
• Insert the supplied jump lead into the socket (6)
on the jump starter. Press it in firmly as far as it
will go.
5.3 Jump starting a vehicle
• Connect the pole terminals of the jump lead in the
following order:
1. Positive terminal (red) to positive pole of the
vehicle battery
2. Negative terminal (black) to negative pole of the
vehicle battery
• Before beginning the start-up procedure, please
check the jump start status LED (7).
Jump start status LED
Constant You can start the vehicle as usual
green with the ignition key.
Incorrect connection of the con-
Constant
nection plugs. Please check the
red
jump lead for incorrect polarity.
Overvoltage protection of the
Flashing
device is activated, or the battery
red
level of the jump starter is too low.
Car battery is completely discharged;
press the BOOST button (8) for 3
No light seconds until the jump start status
LED (7) lights up green. You can now
start the vehicle as usual.
3