EINHELL TE-CF 18 Li Originalbetriebsanleitung Seite 16

3. Intended use
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
Rated voltage ........................................ 18 V DC
Power rating .............................................. 220 W
Water tank capacity ...................................240 ml
Coff ee cup capacity ..................................280 ml
Usable coff ee pad .................................. φ 60 mm
Brewing time ............................................6~8 min
Weight (without battery) .......................... 1.25 kg
Important!
The equipment is supplied without rechargeable
batteries and without a charger and is allowed to
be used only with the lithium-ion batteries of the
Power X-Change series!
The lithium-ion batteries of the Power X-Change
series are allowed to be charged only with Power-
X chargers.
Suitable rechargeable batteries and chargers
from the Power X-Change range are for example:
•
Rechargeable battery: Power X-Change 1.5
•
Rechargeable battery: Power X-Change 5.2
•
Charger: Power X-Charger 3A
•
Charger: Power X-Charger
5. Before putting into operation
Warning!
Always remove the battery pack before making
adjustments to the machine.
5.1 Assembling the machine
When you use the machine for the fi rst time or
after a lengthy storage period, carry out the fol-
Anl_TE_CF_18_Li_SPK13.indb 16 Anl_TE_CF_18_Li_SPK13.indb 16
GB
lowing steps:
1. Remove all the packaging material.
2. Clean all the removable parts, see the section
"Cleaning".
3. To remove possible residues from the machi-
ne, pour 240ml of fresh water into the water
tank.
Rinse the machine's pipes by starting the brewing
operation (see "Brewing operation") without any
coff ee/fi lter/coff ee pad in the fi lter holder and cof-
fee pad holder. Repeat this process at least twice.
WARNING:
Never touch the hot surface and never remove
the water tank lid when the machine is working.
Scalding might occur when the water tank lid has
been removed. Follow all the safety instructions.
5.2 Charging the Li battery pack (Fig. 5-6)
1. Remove the battery pack (a) from the handle,
pressing the pushlock button (b) downwards
as you do so.
2. Check that your mains voltage is the same
as that marked on the rating plate. Insert the
power plug of the charger (c) into the socket
outlet. The green LED will then begin to blink.
3. Push the battery (a) onto the charger (c).
4. In the section entitled „Charger indicator" you
will fi nd a table with explanations of the LED
display on the charger.
The battery pack can become a little warm during
the charging. This is normal.
If the battery pack fails to charge, check:
•
whether there is voltage at the socket outlet
•
whether there is good contact at the charging
contacts
If the battery pack still fails to charge, send
•
the charging unit
•
and the battery pack
to our customer service center.
To ensure that items are properly packaged
and delivered when you send them to us,
please contact our customer service or the
point of sale at which the equipment was
purchased.
When shipping or disposing of batteries and
cordless tools, always ensure that they are
packed individually in plastic bags to prevent
short circuits and fi res.
- 16 -
31.07.2023 14:09:37 31.07.2023 14:09:37