Werbung
Verfügbare Sprachen
Verfügbare Sprachen
F
CAUTION
If the voltage is entered incorrectly, faults and battery damage may occur due to voltage
differences between battery cells.
G
H
Enter the voltage of the additional battery
module once again in the [Confirm Battery
Voltage 1 or 2] and tap [SAVE].
Tap [Match] to start charging or discharging on
the system automatically according to the battery
capacity to be expanded.
NOTE
An error message appears when the
matching process is failed. Try the matching
process again when it is failed.
When the matching is completed, install
additional battery module(s) in the enclosure you
want to expand and reboot the system. Before
re-operating the system, run [Operating Test] to
check the system conditions.
Installation
13
Werbung
