CL 10
Time and Calendar Set
·Move the FUNCTION switch (5) to T.SET (TIME SET ), hour part
is blinking; press UP (7) or DOWN key (9) to set the hour. (Be
careful to set AM or PM correctly. When the PM time is set
under 12-hour mode, a 'PM' mark will be on display.)
·
Press MODE key (8), minute part is blinking; press UP (7) or
DOWN key (9) to set the minute.
·
Press MODE key (8), year part is blinking; press UP (7) or
DOWN key (9) to set the year (from 2002-2099).
·
Press MODE key (8), month part is blinking; press UP (7) or
DOWN key (9) to set the month.
·
Press MODE key (8), date part is blinking; press UP (7) or
DOWN key (9) to set the date.
·
Move the FUNCTION switch (5) to NORMAL, the time and
calendar settings are finished.
Alarm Set
·
Move the FUNCTION switch (5) to AL.SET (ALARM SET ), hour
part is blinking; press UP (7) or DOWN key (9) to set the alarm
hour. (Be careful to set AM or PM correctly.)
·
Press MODE key (8), minute part is blinking; press UP (7) or
DOWN key (9) to set the alarm minute.
·
Press MODE key (8) again, the snooze interval minute is
blinking; here you can set snooze interval from 1 to 60 minutes
by pressing UP (7) or DOWN key (9). You can ignore this step;
the default snooze interval is 1 minute.
32