Positioning The Shredder And Starting It Up - HP 2802 Bedienungsanleitung

EN
1 Reverse running
2 On/Off button
3 Forward running

Positioning the Shredder and Starting It Up

The shredder only operates when the waste bin supplied is fitted. Do not position the shredder
near any sources of heat and maintain a distance of at least 10 cm to walls. This ensures the
shredder is sufficiently cooled.
1 Set the shredder down on a stable, level, horizontal surface and in the vicinity of an easily
accessible power socket.
2 Mount the shredder attachment on the waste bin. The shredder attachment latches audibly in
place. If the shredder attachment is not fitted properly on the waste bin, the shredder cannot
be switched on.
Only use the power cable supplied.
3 Connect the power cable to the device.
4 Connect the power plug to a power socket.
5 Switch the device on by pressing the On/Off button.
Î The status indicator lights up blue.
Î You have put the shredder into operation.
1
overload-red flashing
2
overheat-red on
stand by-blue on
5 4
4 Overheating
5 Overloading
- 14 -
3