Technical Data - VOLTCRAFT VC265 Bedienungsanleitung

Technical Data

Symbol ........................................................4000 counts
Measuring rate ............................................approx. 2-3 measuring operations/second
measuring line length ..................................Approx. 90 cm each
Measuring impedance ................................>10MΩ (V range)
Operating voltage ........................................9V block battery (VC265/VC280)
Working conditions ......................................0 to 30°C (<75%rF), >30 to 40°C (<50%rF)
Operating altitude ........................................max. 2,000 m
Storage temperature....................................-10°C to +50°C
Earth (DMM) ................................................approx. 380 g
Dimensions DMM (LxWxH) ........................185 x 91 x 43 (mm)
Over-voltage category ................................CAT III 600 V, Impurity level 2
DMM measurement tolerances
Statement of accuracy in ± (% of reading + display error in counts (= number of smallest points)). The accu-
racy is valid for one year at a temperature of +23°C ± 5°C, and at a relative humidity of less than 75 %, non-
condensing.
Direct voltage
Range
400 mV
4 V
40 V
400 V
600 V
Other Features
Alternating voltage
Range
4 V
40 V
400 V
600 V
Other Features
54
VC265
±(0,8% + 8)
±(0,8% + 8)
±(1% + 8)
Overload protection 600 V
VC265
±(1,3% + 7)
±(1,3% + 7)
Change to: Frequency range
45 Hz - 1 kHz; TrueRMS;
Crest factor max. 3.0
Overload protection 600 V
2x AAA (CLA40)
Accuracy
VC280
±(0,8% + 8)
±(0,8% + 8)
±(1% + 8)
Overload protection 600 V
Accuracy
VC280
±(1,5% + 8)
±(1,5% + 8)
Frequency range 40 -
400 Hz; Effective average
at Sinus voltage;
Overload protection 600 V
Resolution:
0.1 mV
1 mV
0.01 V
0.1 V
1 V
Resolution:
0.001V
0.01 V
0.1 V
1 V