Before First Use; General Use - GreenPan CC006812 Gebrauchsanleitung Und Garantie

BEFORE FIRST USE

• Remove all packaging, stickers and various
accessories on the inside and outside of
the appliance and check that all items have
been received in good condition or check
for any defects.
• Tear up all plastic bags and dispose of
properly as they can pose a suffocation or
choking risk to children.
Note: When you unpack the appliance,
the cover will be in the locked position. To
unlock, use the slider to move to the open
position. Please do no attempt to open the
cover at any point during the operation, with
the slider in the locked position.
CLEAN BEFORE FIRST USE:
• Remove the removable / reversible plates
and wash with warm soapy water and dry
thoroughly before returning to the base unit.
• Wipe body clean with a dry cloth.
• Confirm plates are securely fastened to the
upper lid and lower base unit.
• Before plugging in, make sure your
electricity supply is the same as the one
shown on the underside of your appliance.
• WARNING: THIS APPLIANCE MUST BE
EARTHED.
• Your Contact Grill / Panini Press /
Teppanyaki is now ready for use.
• Only the removable / reversible plates
are dishwasher safe. NOTE: Do not use
harsh abrasive cleaners, scouring pads or
products that are not considered safe to use
on ceramic non-stick coatings. If washing in
the dishwasher, a slight discolouration to the
plates may occur. This is cosmetic only and
will not affect performance.
8

GENERAL USE

ASSEMBLY INSTRUCTIONS
To get Started, place the GreenPan Contact
Grill / Panini Press / Teppanyaki on a clean,
flat surface. The appliance has three different
positions:
CLOSED POSITION
Top plate / cover rests flat on lower plate /
base. This is the standard Starting and heating
position for the contact Teppanyaki / Griddle or
panini press functions.
OPEN POSITION
Top plate / cover is open. Open the cover to
this position before using the appliance as a
contact Teppanyaki / Griddle or a panini press.
To adjust the appliance into the open position,
lift the handle until you feel it move to a steady
position.
The Teppanyaki / Griddle will remain in the
steady position until you close the cover or
move it to the flat open Teppanyaki / Griddle
position. The top plate / cover will stay in an
upright position until you lower the handle
for cooking. When you lower the handle for
cooking the hinge will self-release to allow the
top plate / cover to lie flat on your food and
ensure total contact and cook your food evenly.
FLAT POSITION
Top plate / cover is opened so that the top
and lower plates are level and create a single
cooking surface.
When opening the cover to the flat position,
hold onto the handle, press the cover release
button on the right of the unit and pull
the handle back until the grill touches the
countertop. Remember to put the drip tray into
position to support the upper grill at the centre.
INSTALLING COOKING PLATES
The appliance should be off and cooled. Put the
appliance in the flat position. Insert each plate
individually. Find the metal holding brackets at
the centre of the housing. Tilt the back end of
the plate and line up the cut-outs with the metal
brackets. Slide the plate beneath the brackets
and push down on the front end of the plate.
You should hear it snap into place. Turn the
appliance 180° and install the second plate into
the upper housing the same way.
REMOVING COOKING PLATES
The appliance should be off and cooled. Put
your appliance in the flat position. Find the
plate release buttons on one side. Press one
button firmly and the cooking plate will pop up
from the base. Grab the cooking plate with both
hands, slide it from under the metal brackets
and lift from the base. Press on the other button
to release the other cooking plate the same
way.
OPERATION
Prior to using this appliance for the first time,
wash the grill / teppanyaki plate, base, lid and
drip tray in accordance with the instructions
given under the "Before First Use" section. Dry
thoroughly and then lightly brush the surface of
the grill plate with cooking oil. Place the drip
tray into the base, then place the grill plate onto
the drip tray. Never use the grill plate directly
on the work surface, always use with the drip
tray and base.
This appliance should only be used on a heat
resistant and easy to wipe clean surface.
Once your appliance is properly assembled,
plug the cord into a standard electrical outlet
and you will be ready to get cooking. The
LCD will illuminate, after any button or dial is
selected, but no cooking function is selected
yet. To turn on the product for function selection,
press the Start / Stop button.
Put your appliance in the preferred cooking
position and use the temperature control to
choose your cooking temperature. Settings
range from Low (80°C) to High (230°C). If you
wish to use the appliance in the flat position
but you do not need the entire surface, it is
recommended that you only use the bottom
plate.
GETTING STARTED
Selecting Plates & Temperature
• To Start using your appliance, turn the plate
select dial to select which plate(s) you need
to adjust setting.
• Select "Lower" or "Upper" if you want to
select a different temperature for each plate.
Select "Both" if want to adjust the setting of
both plates simultaneously.
• Default timer and temperature will appear
on the LCD display.
• Turn the dial to adjust your temperature.
• To adjust your countdown timer, turn the dial
to select the number of minutes.
• Press the Start / Stop button, and you
will notice the LCD screen will display
"PREHEAT" and bars running from left to
right.
• Once it's done preheating, it will beep three
times and the "PREHEAT" disappears and
the minutes will Start blinking.
• Press Start / Stop to Start the timer counting
down and add your food to the plate(s).
NOTE: If both plates complete preheat and
the Start / Stop button is not pressed within
60 minutes, the appliance will go into OFF
mode and LCD turns Off.
• When the countdown timer runs out, the
appliance will beep three times. The time
will reset to the previously selected values
and will Start flashing to indicate that it's
ready to Start the next cycle.
• To Stop cooking, select the plate to turn off,
then turn the temperature dial to beyond
minimum value, "OFF" will display for the
selected plate. If both plates are during
cooking or preheat, pressing Start / Stop
button will turn off the product.
9