TOOLCRAFT 2526774 Bedienungsanleitung Seite 4

8 Operation
1. Place the product on a flat, level, stable, and heat-resistant work surface.
2. Connect a suitable USB power source to the USB-C
product using the USB cable (included).
3. Press the ON/OFF switch to turn the LED lamp on or off.
4. After use, cover the lens with a soft cloth.
9 Cleaning and care
Important:
– Do not use harsh cleaning agents, rubbing alcohol or other chemical solutions. They
damage the housing and can cause the product to malfunction.
– Do not immerse the product in water.
– To protect the lens from scratches, avoid touching the lens with fingernails or sharp
objects.
1. Remove loose particles with clean compressed air, then brush off any remaining debris
with a soft, fine brush.
2. Clean the magnifying glass with a soft, fibre-free cloth moistened with water or lens
cleaning solution. Or clean the magnifying glass with a lens cleaning cloth.
3. Clean the metal base and attachments with a soft, dry cloth. Moisten the cloth with water
if required. Dry well.
4. Store the product in a shaded, cool and dry place.
10 Disposal
This symbol must appear on any electrical and electronic equipment placed on the
EU market. This symbol indicates that this device should not be disposed of as
unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose
of it separately from unsorted municipal waste. Spent batteries and accumulators,
which are not enclosed by the WEEE, as well as lamps that can be removed from
the WEEE in a non-destructive manner, must be removed by end users from the
WEEE in a non-destructive manner before it is handed over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free take-back
of waste. Conrad provides the following return options free of charge (more details on our
website):
in our Conrad offices
at the Conrad collection points
at the collection points of public waste management authorities or the collection points set
up by manufacturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply in
countries outside of Germany.
11 Technical data
11.1 Power supply
Input USB-C port ....................................5 V/DC, min. 1 A
®
11.2 LED lamp
Power consumption .................................4 W
Light source .............................................40 LEDs
Luminous flux ..........................................300 lm
Colour temperature ..................................6500 K
Colour rendering index (CRI) ...................≥80
11.3 Magnifying glass
Magnification
(main / auxiliary lens) ...............................1.75X / 4X
Main lens (Ø) ...........................................100 mm
11.4 Environment
Operating/Storage conditions ..................-20 to +40 °C, <95 % RH (non condensing)
11.5 Dimensions
Base (L x W) ............................................190 x 170 mm
Arm of magnifier (L) .................................265 mm
Arm of helping hand (L) ...........................250 mm
11.6 Weight
Product weight .........................................approx. 1.2 kg
input port (5 V/DC, min. 1 A) on the
®
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights
including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represents the technical status at the time of printing.
Copyright 2023 by Conrad Electronic SE. *2526774_v1_0123_02_DS_m_2L_(1)