AMS CT412 DAB INITIAL Bedienungsanleitung Seite 7

CHAPTER ADJUSTMENT MENU
and press the [ / ] button to show
" P W D S E T " , P r e s s t h e k n o b t o e n t e r
your old password. If the old password is
incorrect,"ERROR" appears on the display,
please enter the password again. If the old
password is correctly entered, "NEW" is
displayed, enter your new password. When
"AGN" is displayed, enter your new password
again. If "SET OK" is displayed, the code has
been updated.
PWD (OFF/ON) : Activating/
Desactivating the security code
When the unit is switched on, Press the [
MENU] button for more than 2 seconds and
press the [ / ] button to show "PWD".
Turn the knob to select "ON" or "OFF": the
password is activated or deactivated.
When set to "ON", the radio code will be
requested every time. If the battery has
been disconnected, the default password
to be entered is "1234". If you only turn off
the ignition (+15/30), the code will not be
requested anymore.
Password entered
Turn the volume knob to change the number,
press [ ] to select a new digit, repeat the
action to finalize the 4-digit code.
Once the password is completely displayed,
press the volume button to confirm, the radio
switches to the last mode listened to (DAB+
or FM).
If the password is incorrect, ERROR appears.
Try entering the password again. If you have
lost the password, contact the after-sales
service."
CLK SYNC
It is set by default to RDS-CT, this function
allows you to set the clock via the FM-RDS
radio. If the radio is used only in DAB (in full
DAB+ countries) you must switch to DAB CT
otherwise the clock cannot be updated.
CLOCK
To manually set the hours and minutes.
CLK DISP
This function allows to display automatically
the clock instead of the "standard" display
(tuner, A2DP, DAB). After 15 seconds, in case
of manipulation of buttons the display will turn
back to "standard" display and will return on
the clock.
Noted: some radio stations, besides their
name, reveal " RT + " information (name of
the artist, titles, etc.), in this case the clock will
display between 2 scrollings of text.
Activation:
Press 2 seconds on "MENU" and then press
EN-6
the button [ / ] several times to select
function. CLOCK_DISP displays, select ON
to activate the function.
12/24H
To select 12 / 24 h Clock format.
BEEP ON/OFF
Rotate the knob to select button beep sound
on or off.
Timer ON/OFF
Timer ON: when ignition of the machine is off,
you can turn the unit on by pressing POWER
button, and it can work for about 2 hours.
Timer OFF: when ignition of the machine is
off, the unit can't work anymore.
MW (ON / OFF)
To activate / deactivate MW reception
LW (ON / OFF)
To activate / deactivate LW reception
AREA SETTING
Rotate the knob to select EUROPE,USA,
JAPAN,AUSTRA, LATIN.