Chapter Adjustment Menu - AMS CT412 DAB INITIAL Bedienungsanleitung

Button Tips
DISPLAY - different screen displays and
information
Allows you to discover the data of your radio
Press the [ MENU ] button and press [>>] to
enter into the DISP SET mode.
Turn the knob to successively display:
In DAB: RT, PTY, MUX, the channel (identify
by number and letter example 7D), the
frequency, then the time
In FM: the band and the frequency, PTY, RT,
then the time.

CHAPTER ADJUSTMENT MENU

Access to the settings menu
During FM or DAB or BT tuner broadcasting:
Press and hold the [MENU] button and then
press the [ / ] button to select.
TA> TA MODE> AF> REG> RUR-URB>
Stereo-mono> DIMMING> SWRCTYPE>
SWRC SET> VOL LAST> PWDSET> PWD>
CLK SYNC> CLOCK> CLK DISP> 12/24H>
BEEP> TIMER> MW> LW> AERA SEL>
Additional specific menu for DAB and BT:
for DAB: DAB ANT / DAB FMLK
for BT: MIC SEL / AUTO CON / AUTO ANS
Wait 1 s and turn the knob to adjust, then
let it be to automatically go back to the start
display.
TA setting ON/OFF
Enable /Disable automatic switching to
FM- tuner mode in case of incoming Traffic
announcements.
TA mode (Traffic information)
Some FM RDS stations may periodically
broadcast traffic information.
TP (Traffic Program Identification)
Identifies programs broadcasting traffic
information
TA (Traffic Announcements Identification)
Identifies radio announcements about the
EN-4
traffic
TA mode: selected ON,
W h e n t h e d e v i c e r e c e i v e s a r e l a t e d
announcement traffic, the TA indicator is
displayed. The device temporarily switch to
tuner mode (regardless of current mode) and
broadcast announcement at volume TA. At
the end of the announcement, the device
returns to mode and volume previous ones.
In TA mode, the search, automatic scanning
and recording of stations only work if the
device receives a TP identification code.
TA mode
Enable /Disable automatic switching to
FM- tuner mode in case of incoming Traffic
announcements.
Rotate the [volume] knob to select TA
ALARM or TA SEEK mode. If the TA (traffic
announcements) is turned on and there is no
traffic program identification code received
in the specified time, no TA/TP will display
and either TA ALARM or TA SEEK will be
activated.
TA ALARM mode
Alarm is turned on. A beep sounds and the
display show "No TATP".
When you are listening a radio station that
does not broadcast TP info.
TA SEEK mode