Electrolux E7US1-4MN Bedienungsanleitung Seite 29

Step 1 Open the pole lock. Stretch the telescopic rod to fully unfold each section.
Step 2 Lock the rod lock.
Step 3 After the telescopic rod is fully extended, align the bulge of the telescopic rod
with the jack groove on the base unit.
Step 4
Press down the telescopic rods until they click.
Filling the water tank
Before filling the water tank, disconnect the power supply.
Step 1 Hold the water tank handle and lift it up.
Step 2 Unscrew the water tank cover.
Step 3 Fill the water tank.
Step 4 Screw back the water tank cover.
Step 5
Hold the water tank handle. Make sure the water tank cover points downwards.
Check the water quantity and ensure that there is no water leaking from the po‐
sition of the water tank cover.
Step 6 Place the water tank vertically on the base unit.
Do not use water containing additives (starch, spices, aromatic substances, softeners,
etc.).
Power on
Before using the product, always check if the appliance is not damaged.
Step 1 Plug the appliance.
Step 2 Press the power button.
Step 3 Press the adjustment button.
Step 4 After approximately 45-70 seconds, the steam nozzle will start to generate
steam.
Ironing the clothes
Never iron the clothes you are wearing.
Do not touch the high-temperature steam and the steam nozzle panel during ironing.
Pay attention to prevent the danger of steam splashing when using the appliance.
Avoid the steam nozzle aiming at people or animal.
Step 1 Hang the clothes on the hanger.
ENGLISH 29