Insertions And Error Messages; Remote Surveillance And Remote Access To The Recorder; Remote Surveillance Via Mobile Phone; And Tablet Computer - Monacor 18.4510 Bedienungsanleitung

8

Insertions and Error Messages

Insertion Error
When "Warning Unformat." is shown as well: The
hard disk is not formatted.
When "Warning Full" is shown as well: The hard
disk is full.
To format the hard disk and thus to delete all recordings:
Call up the menu "Device", select the hard disk in
H
the column "Select" and then click "Format HDD".
*
To change the overwrite mode so that the oldest record-
ings can be overwritten:
Call up the menu "Device", select the hard disk in
the column "Select" and then change the setting
in the field "Overwrite" (e. g. change from OFF to
"Auto" or reduce the number of days).
An alarm has been triggered via one of the alarm
I
*
inputs SENSOR (27).
NO HDD
No hard disk installed.
*
VIDEO LOSS
No video signal available.
*
M
*
Motion detected in the camera image.
R
The camera image is being recorded.
* At the same time, the internal signal device will sound for the time
range defined in the menu "Parameter" or "Advanced"
(see chapter 6.8)
9 Remote Surveillance and
Remote Access to the Recorder

9.1 Remote surveillance via mobile phone

and tablet computer

Mobile phones and tablet computers with the operating sys-
tem "Android" or "IOS" can be used for convenient remote
surveillance.
1) Install the app "RXCamView" from the Apple "App Store"
or the Google "Play Store".
Fig. 9-1 App "RXCamView"
2) Start the app.
3) In the toolbar to the left, select "Config" (a) (Fig. 9-2).
4) In the line "Device" located in the upper right of the menu,
tap the plus sign (b).
Device
Live
Alarm
Playback
Favorites
Record
Image
(a)
Config
Help
RXCamView
Fig. 9-2 Window "Config" / "Device"
5) A pop-up menu will appear. Tap "Manual Adding" (c).
Config
(b)
Device
Manual
(c)
Adding
Scan QR Code
Online Device
Create QR Code
Device
Live
DVR1
Device Name
Alarm
Playback
Login Type Device ID
Favorites
Device ID
Please enter the DDNS ID
Record
Media Port 9000
Image
User Name admin
Config
Password
Please enter password
Channels 8
Help
Disconnected
RXCamView
Fig. 9-3 Window "New Devices"
6) "Device ID" should be selected in the line "Login Type". If
required, change the entry from "IP/ DOMAIN" to "Device
ID".
7) Tap the QR code symbol in the line "Device ID", and then
scan the QR code which can be found on the upper side
of the recorder or enter the ID number provided on the
upper side of the recorder into the line.
8) In the line "Password", enter the password (no password
is factory-set in this line).
9) Finally click the diskette symbol in the line "New Devices"
(located at the top of the window) or tap "Save".
10) For remote surveillance, tap "Live" in the toolbar to the left.
DVR1
Live
Channel 01
Playback
Channel 02
Record Channel 03
Channel 02
Channel 04
Image
IP Channel 01
Con g
IP Channel 02
Help
IP Channel 03
IP Channel 04
RXCamView
Fig. 9-4 Remote surveillance from a smartphone
11) To show the recorder channels, tap the triangle ">" in the
upper left next to the recorder name.
12) To select the number of windows for the recorder chan-
nels, tap the symbol
the menu.
13) Drag each of the desired channels into a separate window.
The respective camera image will then appear. When mul-
tiple recorders are available for surveillance, camera images
of different recorders can be viewed in a single view.
14) Further functions can be called up via the other symbols.
15) To call up online help (English), tap "Help".
Config
New Devices
Live
×
1/1
×
in the toolbar at the bottom of
55