Herunterladen Inhalt Inhalt Diese Seite drucken

Changing Recording Times; Snapshots; Replaying Recordings; Replaying The Most Recent 5 Minutes Recorded By A Camera - Monacor 18.4510 Bedienungsanleitung

Mehrkanal-hybrid-digital-rekorder zur videoüberwachung
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

7.6.1 Changing recording times

1) Call up the main menu; in the menu "Parameter", select
the submenu "Record" and then click the section "Record
Schedule".
Parameter
Record Search
Device
Display
Channel
CH1
Record
0
2
4
6
Record
S
Record Schedule
M
Mainstream
T
Substream
W
Mobilstream
T
Capture
F
Network
S
Copy
CH1
Alarm
Fig. 7-13 Weekly schedule for recordings
According to the factory settings, all camera channels
to which a camera is connected will be recorded from
00:00 – 24:00. To change this setting:
2) After "Channel", a camera channel is selected (here: chan-
nel 1). To change the recording time of a different channel,
click the symbol
.
3) To delete recording times, keep the left mouse button
pressed and move the mouse pointer over the time range
desired. Individual half-hour blocks can be deleted by a
simple click.
4) Proceed in the same way to add recording times you may
have deleted.
5) To automatically start recording when a motion is detected
and/or an alarm is triggered, first click the yellow ellipse
"Motion" or the red ellipse "Alarm". Then keep the left
mouse button pressed and move the mouse pointer over
the time range desired.
6) To use the setting for other camera channels as well, make
the appropriate selection in the line "Copy CH ... To All"
at the bottom of the menu and then click "Copy".
7) To save the times, click "Save". The message "Save Param-
eters Successful!" will appear; click "OK".
8) To exit the recording schedule, click "Cancel".

7.6.2 Snapshots

With the snapshot feature, a snapshot of a camera image can
be saved any time, e. g. to capture an important event during
live surveillance. The snapshot feature is disabled in the factory
settings. Refer to chapter 6.13 on how to enable the snapshot
feature. To save a snapshot:
1) Use the left mouse button to click the live image to
be recorded. (In the single-image mode, simply press the
left mouse button.) The quick-selection bar will appear
(Fig. 7-11).
2) Click the snapshot symbol
3) To show and export snapshots, see chapter 7.7.3.
i
System
Advance
Shutdown
Normal
Motion
Alarm
8
10
12
14
16
18
20
22
To
All
Copy
Default
Save
Cancel
. The snapshot will be saved.

7.7 Replaying recordings

A current recording will not be interrupted when a recording
is being replayed.
7.7.1 Replaying the most recent 5 minutes
recorded by a camera
1) Use the left mouse button to click the live camera image
whose recording is to be replayed. The quick-selection bar
Sunday
will appear (Fig. 7-11).
Monday
Tuesday
2) Click the symbol
Wednesday
Thursday
cently recorded will start and a control bar will be shown:
Friday
Saturday
Fig. 7-14 Replay control bar
3) To stop and continue the replay, use the buttons
4) To view single images one after the other, click the pause
symbol
II
repeatedly.
5) For fast forward or fast reverse, keep the left mouse button
pressed and move the replay button forwards or backwards.
6) To stop the replay at any time, click the red ×.
7.7.2 Recording a specific time range and, if
required, saving it to an external device
To call up the record search calendar, either press the button
 at the unit / on the remote control or
call up the toolbar with the right mouse button (Fig. 7-10) and
click the replay symbol
Parameter
Record Search
General
Channel All
Events
Picture
Playback Channel
Analog Channels
IP Channels
Start Time 00:00:00
Fig. 7-15 Record search calendar
When the calendar is called up, the current day will be selected
(highlighted in yellow).
The days with recordings will be indicated by an orange
triangle.
1) Click the day whose recordings are to be replayed. To go
to a different month, click the white arrow < or > before /
after the month. To select a different year, click the blue
arrow
or
2) The field "Playback Channel" can be used to select and
deselect channels. The channels highlighted in blue will
be replayed.
3) To define a specific period to be replayed, enter a start
time and end time in the fields at the bottom of the menu.
. The replay of the 5 minutes most re-
on the right of the toolbar.
i
Device
System
Type All
Jan.
2017
S
M
T
W
T
25
26
27
28
29
1
2
3
4
5
8
9
10
11
12
15
16
17
18
19
22
23
24
25
26
29
30
31
1
2
1 2 3 4
1 2 3 4
5 6
End Time 23:59:59
after the year.
and II.
Advance
Shutdown
Search
F
S
30
31
6
7
13
14
20
21
27
28
3
4
Play
Cancel
51

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis