Programming Cooking - Bauknecht BAK3 KN8V IN Kurzanleitung

ECO FORCED AIR
For cooking roasts and stuffed roasting joints on a single
shelf. Food is prevented from drying out excessively by gentle,
intermittent air circulation. When this ECO function is in use, the
light will remain switched off during cooking but can be switched
on again by pressing .
1. SELECT A FUNCTION
To select a function, turn the selection knob to the symbol for
the function you require: the display will light up and an audible
signal will sound.
2. ACTIVATE A FUNCTION
To start the function you have selected, turn the thermostat knob
to set the temperature you require.
To interrupt the function at any time, switch off the oven, turn
the selection knob and the thermostat knob to
Please note: During cooking you can change the function by
turning the selection knob or adjust the temperature by turning
the thermostat knob.
The function will not start if the thermostat knob is on 0 °C. You can
set the cooking time, cooking end time (only if you set a cooking
time) and a timer.
AUTOMATIC
To start the automatic function you have selected ("Bread"
or "Pastry"), keep the thermostat knob at the position for
automatic functions ( ).
To finish cooking, turn the selection knob to position
Please note: You can set the cooking end time and timer.
RISING
To start the "Rising" function, turn the thermostat knob to the
relevant symbol; if the oven is set to a different temperature, the
function will not start.
Please note: You can set the cooking time, cooking end time (only
if you set a cooking time) and a timer.
3. PREHEATING AND RESIDUAL HEAT
Once the function starts, an audible signal and a flashing icon
on the display indicate that the preheating phase has been
activated. At the end of this phase, an audible signal and the
fixed icon on the display will indicate that the oven has
reached the set temperature: at this point, place the food inside
and proceed with cooking.
Please note: Placing the food in the oven before preheating has
finished may have an adverse effect on the final cooking result.
After cooking and with the function deactivated, the icon
may continue to remain visible on the display even after the
cooling fan has switched off to indicate that there is residual
heat in the compartment.
Please note: The time after which the icon switches off varies
because it depends on a series of factors such as ambient
temperature and function used. In any case, the product should be
considered to be off when the pointer on the selection knob is at
"0".

4. PROGRAMMING COOKING

You will need to select a function before you can start
programming cooking.
DURATION
Keep pressing until the
on the display.
.
.
icon and "00:00" start flashing
BREAD AUTO
This function automatically selects the ideal temperature
and baking time for bread. For best results, carefully follow the
recipe. Activate the function when the oven is cold.
PASTRY AUTO
This function automatically selects the ideal temperature
and baking time for cakes. Activate the function when the oven
is cold.
Use or to set the cooking time you require, then press
to confirm.
Activate the function by turning the thermostat knob to the
temperature you require: an audible signal will sound and the
display will indicate that cooking is complete.
Notes: To cancel the cooking time you have set, keep pressing
until the icon starts flashing on the display, then use
to reset the cooking time to "00:00". This cooking time includes a
preheating phase.
PROGRAMMING THE END COOKING TIME/DELAYED START
After a cooking time has been set, starting the function can be
delayed by programming its end time: press
and the current time start flashing on the display.
Use or to set the time you want cooking to end and press
to confirm.
Activate the function by turning the thermostat knob to the
temperature you require: the function will remain paused until
it starts automatically after the period of time that has been
calculated in order forcooking to finish at the time you have set.
Notes: To cancel the setting, switch the oven off by turning the
selection knob to the position.
Notes: Delay to start functionality is not available for Grill and
Turbo Grill functions.
END OF COOKING
An audible signal will sound and the display will indicate that
the function has finished.
Turn the selection knob to select a different function or to
position " " to switch the oven off.
Please note: If the timer is active, the display will show "END"
alternately with the remaining time.
until the icon