Bestway FLOWCLEAR 58391 Gebrauchsanweisung Seite 4

TECHNICAL SAFETY INSTRUCTIONS
• The appliance must be supplied by a grounded power source.
• Extension cords can't be used.
• In case of damage to the filter pump, do not use the pool.
• Do not bury cord. Locate cord to minimize abuse from lawn mowers,
hedge trimmers, and other equipment.
• This pump is for use with storable pools only. Do not use with
permanently-installed pools. A storable pool is constructed so that it
is capable of being readily disassembled for storage and reassembled
to its original integrity. A permanently-installed pool is constructed in
or on the ground or in a building such that it cannot be readily
disassembled for storage.
• Using the pump with an unmatched electrical supply is dangerous
and will result in catastrophic failure of pump.
• When working with electricity, turn the electrical power off at the circuit
breaker and lock breaker door. Failure to do so will result in increased
risk of shock, injury and possibly death.
• Do not remove the grounding prong or modify the plug in any way.
Do not use adapter plugs. Consult a qualified electrician for any
questions related to the validity of your plug's grounding.
• Handle the pump with care. Do not pull or carry the pump by the power
cord. Never pull a plug from the outlet by yanking the power cord.
Keep cord free from abrasions. Sharp objects, oil, moving parts, and
heat should never be exposed to the filter pump.
• Cleaning and user maintenance must be performed by an adult above
18 years old who is familiar with the risk of electric shock.
• Consult a qualified electrician for any questions.
• In case of doubt on the pump or any circulation devices, contact a
qualified installer, or the manufacturer/importer/distributor.
• Mind all the safety requirements and recommendations described in
the manual.
• Atmospheric conditions may affect the performance and life span of
your filter pump. Unnecessary wear and tear may occur during periods
of cold, heat and exposure to sun. Whenever possible, shelter the
pump from these conditions.
• It is important to ensure the factory equipped stopper plugs for the inlet
and outlet ports replace the screens before removal or maintenance
on the pump is attempted.
4