Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4. Activate the trigger lock.
IMPORTANT
Leave the primer/spray valve in the primer position until work resumes. If you suspect
that the tip or hose is clogged or the pressure has not been fully relieved after
following the above procedure, SLOWLY AND CAREFULLY loosen the nut holding the
tip guard or hose coupling to gradually relieve the pressure and then loosen it
completely. Unblock the hose or tip.
13
MAN 9066341 EN V1
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: +45 70212626
6600 Vejen, Denmark
E-mail: salg@p-lindberg.dk
Werbung
Inhaltsverzeichnis
Fehlerbehebung
