Bluetooth Pairing - Hama BRS2 Bedienungsanleitung

4. System Requirements
• The Bluetooth
as smartphones and tablet PCs that run the iOS 6 or Android 4.2.2 (or newer)
operating systems.
Note
• Note that support of the Bluetooth
device.
• Please refer to the operating instructions for the device you are using.
5. Getting Started
• Open the battery compartment by undoing the screws on the battery cover (4) using
a screwdriver.
• Remove the battery cover (4) and insert a CR2032 battery with the correct polarity (B).
• Close the battery compartment by putting back the battery cover and tightening the
screws using a screwdriver (B).
6. Operation
Note
• The functions described in this section are only available for Bluetooth
terminal devices.
• Note that the maximum range for Bluetooth
such as walls, people, etc.

6.1. Bluetooth pairing

Note – Pairing
• Make sure that your Bluetooth
is activated.
• Make sure that your Bluetooth
Bluetooth devices.
®
• For more information, please refer to the operating instructions of your terminal
device.
4
remote release supports Bluetooth
®
remote release depends on your terminal
®
is 10 metres without obstacles
®
-capable terminal device is on and Bluetooth
®
-capable terminal device is visible for other
®
-capable terminal devices such
®
-capable
®
®