Setting The Clock; Selecting The Illumination Color; Switching The Background Display - Pioneer AVX-7600 Anleitung

Section
05 Other Functions

Setting the clock

Use these instructions to set the clock.
1 Touch A.MENU and then touch
CLOCK ADJ.
2 Touch OFF to turn the clock display on.
ON will appear in the display instead of OFF.
Clock display is now on.
# To turn the clock display off, touch ON.
3 Touch c or d to select the segment of
the clock display you wish to set.
Each time you touch c or d it will select one
segment of the clock display:
HourMinute
As you select segments of the clock display
the segment selected will be highlighted.
4 Touch a or b to set the clock.
Each time you touch a it increases the se-
lected hour or minute. Each time you touch b
it decreases the selected hour or minute.
Notes
! You can match the clock to a time signal by
touching JUST.
 If the minute is 0029, the minutes are
rounded down. (e.g., 10:18 becomes
10:00.)
 If the minute is 3059, the minutes are
rounded up. (e.g., 10:36 becomes 11:00.)
! Even when the sources are off, the clock dis-
play appears on the display.
14
En
Selecting the illumination
color
This unit is equipped with two illumination col-
ors, green and red. You can select the desired
illumination color.
1 Touch A.MENU and then touch ILLUMI.
2 Touch a or b to select the desired illu-
mination color.
Touch a to select GREEN (green). Touch b to
select RED (red).
Switching the background
display
You can switch background displays while lis-
tening to each source.
% Press ENTERTAINMENT.
Each time you press ENTERTAINMENT the
display changes in the following order:
Video of currently selected sourceBGV
(background visual)NAVI (navigation unit
wallpaper)
# When this unit is turned off, you cannot use
ENTERTAINMENT.
Notes
! When a Pioneer navigation unit is not con-
nected to this unit, you cannot switch to
NAVI.
! When the selected source is an audio source,
when you select the video of currently selected
source, nothing is displayed on the display.