Removal Of Clogging And Blockage; Replacing The Collection Bag; Safekeeping - Parkside FLB 2500 A2 Originalbetriebsanleitung

• Take off the collection bag after finish-
ing work, turn it inside out and brush
it thoroughly. In this way, you avoid
the generation of mold and unpleasant
odours.
• Free the outlet area from possible
shredded residues.
Removal of clogging and
blockage
Leaf material and fresh plant parts may
clog / block the device.
Cleaning.the.impeller.wheel:
Pull out the mains plug!
D
1. Remove the Allen key attached to
the power cable (
2. Use the key (13) to open the
screw on the impeller wheel
cover (25) and tip up the cover.
3. Carefully remove residues or
clogging materials from the im-
peller wheel (24).
4. Check to make sure the impeller
wheel is easier to turn and is in
undamaged condition. Have our
Service Centre (see p. 65) re-
place a defective impeller wheel.
5. Screw the cover down tight.
The device cannot be operated
unless the impeller wheel cover is
closed and properly screwed down.
Cleaning.the.air.outlet.area:
1. Remove the collection bag.
2. Clean the external air outlet area on
the device.
3. Set the operating mode selector switch
to the suction symbol.
13)
A
4. Remove dirt residues in the inner air
outlet area with a bottle brush or simi-
lar. Remove unwieldy objects with a
blunt tool without sharp edges.
Cleaning.the.blower./.suction.tube
1. Remove the collection bag loop from
the hook.
2. Remove the fastening screws (
and pull off the blower / suction tube.
3. Knock material out of the inside of the
tube and clean it as required.
4. Remount the tube and reattach the col-
lection bag loop to the hook.

Replacing the collection bag

Replace a defective collection bag. Employ
only original collection bags (see "Spare
Parts"), otherwise the guarantee claim is
invalid.

Safekeeping

• Keep the leaf blower in a dry, frost-free
location, which is inaccessible to chil-
dren.
• Do not store the device in direct sunlight;
store it in dark or in reduced light condi-
tions.
• Do not cover the device with nylon
bags, since moisture can form.
• Clean the device thoroughly at the
season end and for storage during win-
tering. Clean the collection bag by re-
moving it, emptying it and washing with
warm water and neutral soap. Re-attach
the dried bag again.
• Ensure that all nuts, bolts and screws
are tightened so the equipment is in
safe, functional condition.
GB
4)
B
61