Radio Operation; Tuning Radio Stations - Blaupunkt B 30e Bedienungsanleitung

B 30e

Radio Operation

Tuning Radio Stations

1. Set the FUNCTION switch to RADIO position.
2. Set the BAND switch to select the desired wave band: AM/FM ST.
3. Tune to required station by rotating the TUNING KNOB.
4. Rotate the VOLUME KNOB to comfortable volume level.
5. Extend the TELESCOPIC ANTENNA to its full length when listening to FM broadcasting.
Gently move the unit back and forth to get the best reception when listening to AM
program, or place the unit in an open place.
Note: The "STEREO" indicator will show on the display when receiving FM stereo program.
6. Turn off the radio by switching the FUNCTION switch to "CD/MP3/USB/AUX" or
"BLUETOOTH" position.
CD/MP3 Operation
Discs Playback
This system can playback all digital audio, including CD/MP3, finalized digital audio CD-
Recordable (CD-R) discs, finalized digital audio CD-Rewritable (CD-RW) discs and CD-DA
format digital audio CD/CD-R/CD-RW discs.
Loading A Disc
1. Set the FUNCTION switch to "CD/MP3/USB/AUX" position.
2. Press the PUSH TO OPEN button to open the CD door, "OP" will be shown on the display.
3. Place an audio CD/MP3 DISC into the tray with the front side facing up.
4. Close the CD door.
The display will show a flashing "- - - ", then the total number of tracks would be shown.
5. Press " /PAIR" button to start playback from first track.
6. To remove the CD, press PUSH TO OPEN to open CD door, the display will show "OP".
Hold the CD by its edges, and carefully take it out.
Note:
Make sure the disc is stopped before opening the CD DOOR.
Ÿ
To ensure good system performance; wait until the unit completely reads the disc
Ÿ
before proceeding.
If no disc loaded into the tray, or the disc is unreadable, the display will show " NO ".
Ÿ
Playing A Disc
1.The playback starts from track 1 automatically when reading the disc, the "PLAY"
indicator would shown on the display.
To pause playback, press the PLAY/PAUSE/PAIR button, The "PLAY" indicator and the
current track will flash on the display. To resume playback, press the PLAY/PAUSE/PAIR
button again.
2. To stop playback, press the STOP/DISC/USB button, the total number of tracks would
show on the display.
43