Programming Random Switching - Grasslin Topica Smart Bedienungsanleitung

PROGRAMMING RANDOM SWITCHING

Random switching is only possible for certain variants.
Menu
OK
Program
OK
New
With Date?
Yes/No
Select FNC
Random ON/OFF
Fig. 28: Programming random switching
Random programming is only possible in advanced mode (Ä Chapter "Selecting the mode" on
page 77).
Example
The channel is switched on at random at 6:30 a.m. with an offset of ± 30 minutes, Monday to Friday.
1. Press the
Menu
2. Select program and confirm with
3. Select new and confirm with
The number of available program memory slots is displayed briefly (PXXX).
ð
The number of available switching program memory slots is displayed briefly (dXXX).
4. In menu item
With Date?
(ÄChapter "Date-dependent/date-independent programming" on page 85).
5. Select the
Random ON
You can define an offset of up to ± 2 hours.
OK
Time
6:00
Hours
Time
6:30
Minutes
OK
Offset
0:00
Hours
OK
button.
.
OK
.
OK
, specify whether the switching program is to be programmed with a date
or
Random OFF
Days
12345--
Mon – Fri
OK
OK
OK
Offset
0:30
Minutes
function and confirm with
OK
OK
Add
switching time?
Yes/No
OK
Priority
Very low...
.
OK
EN
97