Grasslin topica smart Bedienungsanleitung Seite 91

7. If astro correction is activated, select the desired setting and confirm with
8. Select the specification of the desired astro correction setting (ÄChapter "Programming an ON
command" on page 88) and confirm with
9. Set the day(s) of the week (⋀/⋁) on which the switching time should apply, and confirm with
The days of the week 1 – 5, 6 – 7 and 1 – 7 are set by default. Individual days of the week
can be set (+/-) under menu item "Select days".
10. To create a new switching time, select
11. Adopt the automatically suggested priority and confirm with
You can only select a priority in advanced mode (ÄChapter "Prioritizing programs" on
page 87).
.
OK
and confirm with
YES OK
OK
.
OK
.
or adjust the priority.
EN
.
OK
91