Grasslin topica smart Bedienungsanleitung Seite 79

Possible settings
Override mode OFF (OVR)
OVR
1
Automatic mode ON
1
Automatic mode OFF
1
In override mode, the current program is temporarily
overwritten.
• End the current program with "Override mode OFF".
The override function only applies to the current program and
remains active until the next automatic command. Then the
device returns to automatic mode.
Example:
A daily program switches the device on every day from 8:00
a.m. to 5:00 p.m. If, however, you want the device to switch off
at 4:00 p.m. one day, use the override mode.
Channel switches on based on the programmed switching
times.
Channel switches off on the basis of the programmed switching
times.
EN
79