Herunterladen Inhalt Inhalt Diese Seite drucken

Operation; Adjust Handle; Shutting Down - Kärcher BDP 50/1500 C Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für BDP 50/1500 C:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
1 Nut
2 Tool
 Unscrew the nut in the clockwise direc-
tion using the enclosed tool.
 Remove the washer.
 Place the pad on the centre of the driv-
ing plate and press it slightly.
 Install the washer.
 Screw the nut in the anti-clockwise direction
and tighten it using the enclosed tool.
 Remove the tool.
 Tilt the appliance forward.

Operation

DANGER
Risk of injury on account of the rotating
pad. Do not bring your hands and feet any-
where close to the rotating pads.

Adjust handle

 Pull the lever for level adjustment.
 Tilt the handle into a comfortable position.
 Release the lever for level adjustment.
Transport
 Park the handle in vertical position.
 Tilt the appliance backwards and drive
it to the place of use.
Turning on the Appliance
Warning
Risk of damage to the floor covering. Do
not operate the appliance on the spot.
Do not use the appliance when no pad is
mounted.
NOTICE
The device cannot be switched on while the
handle is perpendicular to the floor.
 Swivel bottom cable hook upward and
remove the cable completely from the
appliance.
 Insert the mains plug into a socket.
The indicator lamp "main power" will il-
luminate.
 Set handle to working height.
 Hold the handle with both hands.
 Press the left or right release and hold it.
 Press the switch on the same side - the
appliance starts.
 Release unlocking mechanism.
 Move the appliance forward and back-
ward over the surface to be processed.
 Release the switch to interrupt operation.

Shutting down

 Release the switch.
 Disconnect the mains plug from the socket.
 Pull the lever for level adjustment and
bring the handle in a vertical position.
 Swivel the cable hook toward the bot-
tom and wind the cable between the
handle and the cable hook.
 Tilt the appliance backward and store it
on the handle.
 Remove the pad.
 Tilt the appliance forward.
 Clean the casing with a damp cloth.
 Store the appliance in a dry room.
WARNING
Device can roll away and cause accidents.
Do not park the device on slopes.
– 4
EN
13

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis