Herunterladen Inhalt Inhalt Diese Seite drucken

Original Accessories / Tools - Parkside PDEXS 150 A1 Bedienungshinweise Und Sicherheitshinweise Originalbetriebsanleitung

Druckluft-exzenterschleifer
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

Safety advice
DAngER oF InJURY! Disconnect the device
from the compressed air source before carrying
out any repairs or maintenance of the device
or moving it to another location.
Take precautions to ensure that other
people are not contaminated (dust
generation).
Do not remove rating plates or labels - they
are safety-relevant parts of the device.
If you are inexperienced in the use of this type
of device, you should seek out information or
training to learn how to handle it safely.
Always use a quick-release coupler to
connect this device to a compressor.
When emptying the dust bag, take
care not to send any sanding dust into
the air. Do not inhale the sanding dust.
Always disconnect this device from the
compressed air supply before you:
- Replace a sanding sheet or backing
plate
- Rectify malfunctions or
- If the device is defective
Protect the device and in particular
the compressed air connection and
operating controls from dust and dirt.
CAUTIon! DAngER oF FIRE!
Ensure that the material being
ground and the grinder itself
do not overheat. Always empty the dust
container before taking a break from work.
Grinding dust in the dust sack, microfilter, paper
sack (or in the filter sack or filter of the vacuum
cleaner) can ignite automatically under unfa-
vour-able conditions such as flying sparks when
metal is being ground. There is a par-ticular
hazard if the grinding dust is mixed with paint
or polyurethane residues or other chemical
substances and the material being ground is hot
after being worked on for a prolonged period.
ToXIC vAPoURS! The work-
ing of materials that can produce harmful / tox-
ic dusts presents a health risk for the operator
and for people located in the close vicinity.
When working for extended periods
on wood and, in particular, materials
that produce dusts that are hazardous
8
GB/IE
to health, connect the appliance to an
appropriate external suction device.
Do not soak materials or surfaces to
be worked with liquids containing
solvents.
Avoid sanding lead-based paints or
other materials that are hazardous to
health.
Material containing asbestos may not
be worked. Asbestos is considered to be a
carcinogen.
Avoid contact with the moving sand-
ing sheet.
Use the appliance only with a sanding
sheet in place.
The appliance must always be kept
clean, dry and free of oil or grease.
Keep your workplace clean. Material
mixtures are particularly dangerous. Light metal
dust can burn or explode.
Secure the workpiece. A workpiece held
in a clamp or vice is kept more securely in place
than one held by your hand.
never support yourself by placing your
hands near or in front of the device or
the workpiece surface. A slip can result
in injury.
Ensure that flying sparks do not endan-
ger the safety of other people. Remove
combustible materials from your working area.
Flying sparks are often created while you are
abrading metals.
Introduce the appliance to the work
piece with it switched on. On task com-
pletion, lift the appliance from the work piece
and then switch it off.
Permit the switched off appliance to
come to a complete standstill before
putting it down.

original accessories / tools

Use only the accessories detailed in the
operating instructions. The use of inserted
tools or accessories other than those recom-
mended in the operating instructions could lead
to you suffering an injury.

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

64578

Inhaltsverzeichnis