Black Streaks Appear In Images - Canon imageRUNNER ADVANCE DX serie Anleitung

Printing Results Are Not Satisfactory
Black Streaks Appear in
Images
Solution
Is the document feed scanning area dirty?
If the Single Pass DADF-C is attached:
1. Turn OFF the machine, and unplug the power
plug from the AC power outlet.
2. Open the feeder, and clean the lower side
document feed scanning area (a) and feeder
white plate (b) using the supplied glass-cleaning
sheet.
N O T E
Do not use glass cleaner or an alcohol solution,
etc., as they will strip away the stain-proof
coating.
b
a
3. Open the cover.
4.
Open the inner cover.
16
2
1
5. Wipe the original scanning area and feeder
white plate.
Wipe the thin and
long glass area
and white plate.
6. Close the cover and inner cover.
7.
Close the feeder.
8. Insert the power plug into the power outlet, and
turn the power ON.
N O T E
If black streaks still appear after dirt removal, perform
the following procedure to execute [Clean Feeder].
User's Guide
For more information
If the DADF-BA is attached:
1. Open the feeder, and clean the lower side
document feed scanning area using the
supplied glass-cleaning sheet.
N O T E
Do not use glass cleaner or an alcohol solution,
etc., as they will strip away the stain-proof
coating.
2. Close the feeder.
N O T E
If black streaks still appear after dirt removal, perform
the following procedure to execute [Clean Feeder].
User's Guide
For more information