Optionen - Fronius Symo 10.0-3 208-240 Installationshandbuch

Optionen

Optionen
40
HINWEIS! A DIN rail is provided
in order to mount accessory elec-
trical devices including, but not li-
mited to, overcurrent protection,
metering, radio or cellular modem.
Maximum size for mounting of all
devices is 4w x 4,75l x 2,75 in-
ches. The installer takes responsi-
bility for any undesired effect on
the inverter by installing an electri-
cal device in this area, caution
should be taken when installing a
device that may output significant
amounts of heat or radio interfe-
rence. Always insure that the de-
vice does not inhibit the inverter
from closing and sealing properly.
Any questions about device eligi-
bility should be directed toward
technical support.