Location And Function Of Parts And Controls; Front / Rear / Right Side - Sony PFM-32C1 Bedienungsanleitung

Location and Function
of Parts and Controls

Front / Rear / Right Side

Front
Rear
2
The shaded areas shown in the illustration above are all
ventilation holes.
Right side
1
4 3 5
6

Location and Function of Parts and Controls

1 1 (standby) switch / indicator section
For details on the 1 (standby) switch / indicator section,
see "1 (standby) Switch / Indicator Section" on page 8
(GB).
2 Control button section
For details on the control button section, see "Control
Button Section (Top)" on page 8 (GB).
3 - AC IN socket
Connect the supplied AC power cord to this socket
and to a wall outlet. Once you connect the AC power
cord, the STANDBY indicator lights up in red and the
display turns to the standby mode.
For more details on the power cord, see "Connecting the
AC Power Cord" on page 13 (GB).
4 SPEAKER Socket
The audio component of the signal displayed on the
screen is output when speakers (not supplied) are
connected to this socket.
5 Stand installation hooks
Use these hooks to install the stand (not supplied).
6 Connector panel
For details on the connector panel, see "Connector Panel"
on page 9 (GB).
7
(GB)