Readable Data Files - Pioneer KURO PDP-LX6090H Bedienungsanleitung

12 Using with other equipment
Note
• Do not use any USB devices other than those specified. Using
other devices can cause a malfunction.
Readable data format
This system reads FAT16, FAT32 or NTFS.

Readable data files

Movie, music, and photo files play with the exception of Digital
Rights Management (WMDRM10) protected files.
Your flat screen TV supports a single USB device at a time. Also, the
panel does not support USB hubs.
This system may not be able to display modified or edited content
from a PC or other equipment.
Your flat screen TV supports the USB Mass Storage Class and PTP
devices.
Some digital cameras may require a setup procedure for Mass
Storage Class data transfer. The setup is done on the camera. See
the operating instructions supplied with the digital camera.
Depending on the type of your memory card or camera, some
images may fail to display.
Remove a USB device
To remove a USB device, exit the Home Media Gallery first then
disconnect the device.
Be sure to exit the Home Media Gallery screen before removing the
USB device. If you remove the USB device while the Home Media
Gallery screen is displayed, data inside the memory may be
damaged.
Do not insert or remove the USB device immediately after the
system is switched On or Off. This action may cause data inside the
memory to be damaged.
Pioneer is not liable for any loss or damage to the data inside the
USB flash drive.
Run the Home Media Gallery
1 Press HMG.
The Home Media Gallery menu appears on screen.
2 Select "Media Navigator", "USB", "HMG Playlist" or "HMG
Setup".
Use the arrow buttons to highlight an option then press ENTER.
To return to the previous screen, press RETURN.
To exit Home Media Gallery, press EXIT or HMG.
Media Navigator
USB
HMG Playlist
HMG Setup
72
En
Use the Media Navigator
By selecting Media Navigator, the previously selected server menu
automatically appears on the screen. When only one server is
found, the system automatically connects the server. You can also
use the TOOLS Menu to switch to another server or manually select
a server from the Server List. The screen automatically changes to
the Server List if there are no previous servers.
1 Press HMG.
The Home Media Gallery menu appears on screen.
2 Select "Media Navigator".
Use the arrow buttons to highlight an option then press ENTER.
The Server List screen appears depending on the setting. Select a
desired server from the Server List. The file/folder configuration may
vary depending on the server selected.
Movie
Music
Photo
User Files
4
3 Select the desired folder to navigate or file/content to play.
4 Press ENTER to display a subsequent screen.
A subsequent screen appears.
To return to the previous screen, press RETURN.
To exit Home Media Gallery, press EXIT or HMG.
Note
• The Media Navigator launch depends on the option selected in
"Auto Connection" (page 84). The screen displays after
selecting a server from the server list.
Navigate through a USB device's files and folders
Like navigating through media servers, select the specific file from
a device on the USB Device screen to start an appropriate player.
For details, follow the steps below.
1 Press HMG.
The Home Media Gallery menu appears on screen.
2 Select "USB".
Use the arrow buttons to highlight an option then press ENTER.
The USB Device screen appears. Select the device. When using a
single directory device (USB flash drive), the USB Device screen
does not appear.
USB A
USB B
USB C
USB D
USB E
USB F
USB G
15
(Sample screen)
(Sample screen)