Useful Adjustment Settings - Pioneer KURO PDP-LX6090H Bedienungsanleitung

11

Useful adjustment settings

Chapter 11
Useful adjustment settings
About "Option" menus
The "Option" menu consists of two screens. To select the desired
menu, press / repeatedly to switch between Screen 1 and
Screen 2. The current screen number appears at the bottom left
corner on the screen.
Position
Auto Size
Side Mask
HDMI Input
HDMI Control Setting
Blue LED Dimmer
Orbiter
Video Pattern
1/2
Drive Mode
Colour System
Input Select
Game Control Pref
Room Light Sensor
Screen Protection
Label Input
2/2
Auto Setup
Manual Setup
HDMI Input
HDMI Control Setting
Orbiter
Label Input
54
En
: Off
: Auto
: Mode 1
: 1
: Auto
: Off
: Off
(For AV source)
: Off
(For PC source)
Switching the vertical drive mode
(AV source only)
You can select the desired drive mode according to the programme
you watch.
1 Press HOME MENU.
2 Select "Setup" (/ then ENTER).
3 Select "Option" (/ then ENTER).
4 Select "Drive Mode" (/ then ENTER).
5 Select the desired parameter (/ then ENTER).
Drive Mode
Controls the driving frequency for output signals
Selections 1
2
3
6 Press HOME MENU to exit the menu.
Note
• This setting can be made for each input source separately.
• This setting cannot be made when 480i, 480p, 1080i@60 Hz,
720p@60 Hz, 1080p@24 Hz or 1080p@60 Hz signals are input.
• The Drive Mode does not operate when "On" is selected in
"Game Control Pref".
Adjusting image positions
(AV source only)
This setting adjusts the horizontal and vertical positions of images
on the flat screen TV.
1 Repeat steps 1 to 3 provided for
mode (AV source only) .
2 Select "Position" (/ then ENTER).
3 Select "H/V Position Adjust" (/ then ENTER).
4 Adjust the vertical position (/) or the horizontal position
(/).
5 Press HOME MENU to exit the menu.
Standard mode as well balanced
setting for general sources
Suitable setting for pictures with
scrolling text
Setting for smoother reproduction
of movies, etc.
Switching the vertical drive