Other Functions - Electrolux ASSISTENT EKM4 Serie Gebrauchsanweisung

5
Tilting the Motor head down: Move the Tilt head locking lever to "Unlocked" with one hand, tilt the Motor head
down with the other hand. Insert the plug in the main socket.
6
Move the Speed selector from "OFF" to desired speed (1-10). Once mixing is complete, turn the Speed selector
to "OFF" and unplug the appliance.
7
Work light and Power indicator light: If the appliance is plugged in and a speed is selected, a blue LED lights
up around the Speed selector. A working light will also light up over the working area. If the Speed selector is
8
Note: If the Speed selector is already turned on before the appliance is plugged in, both the blue Speed selector

OTHER FUNCTIONS

9
How to use the coated SoftEdgeBeater™ * tool:
The SoftEdgeBeater™ is perfect for creamy mixtures and toppings.
The silicone edges of the beater, gently wipes the sides on the bowl helping to incorporate all the ingredients in
the mixture and to ensure even consistency throughout the mixing process.
10
Note: Do not use the coated SoftEdgeBeater™ * with heavy mixtures such as dough, use the dough hook tool
11
How to use the PerfectRiseLid™ *:
The PerfectRiseLid™ isolates and helps to build up the humid environment for the dough to rise in proper
condition.
Covering the bowl with the PerfectRiseLid™ keeps the dough from drying out, preventing the formation of a
crust on the surface of the dough, which inhibits the proper rising of the dough which results in a poorer baking
result.
12
How to use the Pulse function*:
If the machine is set to speed 1/P, you can temporarily stop the machine by pressing the "PULSE" button on the
speed selector. Pressing it again will start the machine for 1,5 seconds. If you press continuously the machine will
work as long as you keep the button pressed.
13
How to use splash guard:
• Do not over ll the machine to avoid spillover and motor overloaded.
• Use the splash guard to protect against liquid/light mixtures. Ingredients can be added directly to the
via the feed hole of splash guard.
• For heavy dough mixtures (e.g. bread), it's not suggested to use splash guard. While mixing dough, in order
avoid our splash, keep the appliance at setting 1 for 60 seconds, then turn to recommended speed.
14
Attachment hub: The appliance comes with a built in multipurpose Attachment hub. Read and carefully follow
the instructions that comes with each attachment for correct and safe use.
15
Adjusting the Attachment shaft: The appliance is adjusted at the factory so that the Flat Beater clears the
bottom of the Bowl. If the Flat Beater hits the bottom of the Bowl or is too far away from the sides, you can adjust
it correctly. See 14 for further instructions.
16
Turn the Speed selector to "OFF" and unplug the appliance. Tilt the Motor head back. Use a slotted point Head
screwdriver to adjust the screw. Turn counter clockwise to raise the Attachment shaft, turn clockwise to lower it.
HOW TO USE THE MEAT GRINDER*
17
Insert the grind screw (B) into the grinder housing (A). Place the knife (C) over the square shaft at the end of
the grind screw. Place the grinding plate (D) (medium or coarse) over the knife. Tighten the ring (E) by hand until
the meat grinder is secured.
Note: Do not over tighten the ring.
18
Open the Attachment hub Lid on the Stand mixer. Fit the Power shaft of the attachment in the Attachment hub
socket on the Stand mixer. Rotate the attachment back and forth if necessary. Tighten the Attachment hub knob
until the attachment is fully fastened.
Caution:
19
Place the food tray over the grinder housing. Cut raw meat into small pieces and place it on the food tray. Plug
in the appliance and turn the speed selector to desired speed (recommended speed: 6-8). Feed the meat into the
feed chute by using the pusher.
Caution:
Note: Meat should not contain bones, muscles or skin.
www.electrolux.com
GB
FR
AR
CZ
DE
. Turn
DK
EE
FI
HR
HU
IT
LT
LV
NO
PL
RO
RS
RU
SE
SI
SK
TR
UA
7