Hama KHL 42 Bedienungsanleitung Seite 6

Roller release:
If the laminate sleeve is not inserted or fed evenly,
pushing on the release button (on rear left) will „open"
the rollers so the laminate can be removed and inserted
again.
Device care:
Roller cleaning:
1. Switch the laminator on as previously described.
2. Fold a size DIN A4 piece of paper and push it into the
device with the folded side fi rst.
3. Repeat this again until there are no more traces of
glue on the paper.
Machine cleaning:
1. Switch off the device and unplug it from the power
supply.
2. When the laminator has cooled down clean the
outside with a soft cloth.
Technical data:
- Number of rollers:
- Mains supply:
- Power consumption:
- Max. sleeve thickness:
- Max. lamination width:
- Max. lamination height:
- Warm-up time:
- Lamination speed:
Downloaded from www.Manualslib.com
Four
220 - 240 V~
400 W
150 µm
245 mm
0.6 mm
4-6 minutes
350 mm/min
manuals search engine
5