Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Notes; Important Notes; Functions - Märklin H0 BR 798 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für H0 BR 798:
Inhaltsverzeichnis

Werbung

Safety Notes

• This locomotive is to be used only with an operating system
designed for it (Märklin AC, Märklin Delta, Märklin Digital or
Märklin Systems).
• Use only switched mode power supply units and transformers
that are designed for your local power system.
• This locomotive must never be supplied with power from more
than one transformer.
• Pay close attention to the safety notes in the instructions for
your operating system.
• The feeder track must be equipped to prevent interference
with radio and television reception, when the locomotive is
to be run in conventional operation. The 74046 interference
suppression set is to be used for this purpose.
• Do not expose the model to direct sunlight, extreme changes
in temperature, or high humidity.
• WARNING! Sharp edges and points required for operation.

Important Notes

• The operating instructions and the packaging are a compo-
nent part of the product and must therefore be kept as well as
transferred along with the product to others.
• Please see your authorized Märklin dealer for repairs or spare
parts.
• http://www.maerklin.com/en/imprint.html
• The warranty card included with this product specifies the
warranty conditions.
This specially prepared model is an exclusive version, which
reproduces the condition of the original after many years of
operation in wind and weather.
14
This special series was only produced in a small quantity. The
artificial weathering was separately applied with careful hand
work by experienced artisans. Despite a final fixing of the colors
with varnish, this additional application of color does not form a
homogeneous, hard coating.
Therefore, please handle the model with special care and avoid,
scratching, rubbing, or wiping the surface and the details.
Please do not use liquid cleaners or cleaning solutions.
Please note that the spare parts for this model weathered at the
factory are only available in non-weathered version.

Functions

• Recognition of the mode of operation: automatic.
• Addresses that can be set:
1-80 (Control Unit 6021/Mobile Station 60651/652)
1-255 (Central Station 60xxx/Mobile Station 60653)
• Address set at the factory: 60
• Mfx technology for the Mobile Station / Central Station.
Name set at the factory: BR 798 667-2
• Adjustable acceleration (ABV).
• Adjustable Braking delay (ABV).
• Adjustable maximum speed.
• Setting the locomotive parameters (address, acceleration/
braking delay, maximum speed):
with the Control Unit, Mobile Station, Central Station.
• Headlights change over with the direction of travel.
• Headlights can be turned off on the end of the motor car that
couples to the control car.
• Only the train control functions and headlight changeover
feature are available in analog operation.

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

H0 br 99839989

Inhaltsverzeichnis