User Menu Customization - IKEA BEJUBLAD Handbuch

ENGLISH

User menu customization

Press .
Press again and hold for 3 seconds.
1. The button start flashing.
2. Press and hold the
3. Holding start pressing the zones digitis in clock direction, starting from the bottom left.
The back left hand digit alternately shows
front left hand digit shows a number that depends on the parameters indicated in the selection.
Select a number on the power bar to access the settings menu and enter a value.
See the table below for the specifications:
Menu Code Description
U2 Menu to manage the button sounds volume.
U3 Menu to manage the counter buzz volume.
U4 Menu to manage the display lighting level.
U5 Menu to manage the countdown animation.
U6 Pan recognition function always active menu.
U7 Menu to manage the end of countdown buzzer.
Once the correct value has been entered, confirm by pressing and holding
To exit the menu without saving, press
If no operations are carried out, the user menu will close after 1 minute.
and digit of the zone show
2
1
and a number from 2 to 7, indicating the type of menu. The
.
.
3
4
0 (sound off) - 1 (min.) - 3 (max.)
0 (sound off) - 1 (min.) - 3 (max.)
0 (max.) - 9 (min.)
0 (animation off) - 1 (animation on)
0 (active) - 1 (not active)
0 (continuos flashes and switch off)
1 (ten flashes and switch off)
2 (one flash and switch off)
for 2 seconds.
17
Value