IKEA BEJUBLAD Handbuch Seite 15

ENGLISH
20
Timer with alarm for generic use.
To activate: Turn the hob on, making sure there are no pans or active cooking areas.
The 3 digits for the Timer management commands show "- - -".
Press the digit to access the Timer menu and view " 0 0 0 ".
Press "+" or "-" to set the countdown.
Timer
(generic)
Do not touch anything for 10 seconds to confirm the time.
When the countdown ends, the digits return to zero and a buzzer sounds. This can be turned off
by pressing any of the buttons.
Repeat the operations described to modify the countdown value.
To deactivate: Turn the hob on, making sure there are no pans or active cooking areas.
Press the digit to access the Timer menu and use "+" and "-" to set the Display to " 0 0 0 ".
To activate: select one of the 4 cooking areas and press
The digit for the selected area will show
Melting
To deactivate: press
This function is used to heat up a pan at maximum power before continuing to cook at a
selected level. The period of time the cooking area will remain at maximum power depends on
the final cooking level that is set. See table:
Heat-up
Function
To activate, with a pan on the hob and selected cooking area, press and hold for 3 seconds on
the selected value (from 1 to 8) on the power bar. The Display for the corresponding area shows
" A " .
It is possible to increase the cooking level, but if it is decreased the function is deactivated.
It can also be deactivated by pressing and holding for 3 seconds the button for the cooking area
in question.
This function allows any other active function on the hob to be paused/resumed, reducing the
power in the cooking area and all the functions to zero. If the pause function is not deactivated
within 10 minutes, the hob will switch off automatically.
Pause
To activate: With a pan on the selected hob and cooking area, press and hold the Pause button
Function
for at least 1 second. All the Displays show
To deactivate: press and hold
seconds. The function is deactivated and the hob continues with the previous setting.
Hours
Tenths
or press .
Lev. Power
1
2
3
4
5
6
7
8
9
P
.
for 1 second until it flashes. Press any other button within 10
Minutes
.
Time
48 seconds
144 seconds
230 seconds
312 seconds
408 seconds
120 seconds
168 seconds
216 seconds
not available
not available
15
20