Introduction; Proper Use; Features And Equipment; Included Items - Parkside KH 3041 Bedienungs- Und Sicherheitshinweise

Introduction

the following pictograms are used in these operating instructions / on the device:
Read the operating instructions!
Always heed warning labels and
safety instructions!
Wear hearing protection and
protective glasses
Air stapler set
Introduction
Q
Please make sure that you familiarise
yourself fully with the way the fastener
driving tool works before you use it for
the first time and that you understand how to handle
fastener driving tools correctly. to help you do this,
please read the accompanying operating instruc-
tions. Keep these instructions in a safe place. If
you pass the fastener driving tool on to anyone
else, please ensure that you also pass on all the
documentation.

Proper use

Q
this device is intended for assembly and repair work
(see Fig. B, C, D). Any other use or modification to
the device shall be considered as improper use
and could give rise to considerable risk of accident.
We will not accept liability for loss or damage arising
from improper use. the device is intended for private,
domestic use only.

Features and equipment

Q
Exhaust cover (rotatable)
1
trigger
2
Handle
3
threaded plug-in nipple ¼" ext. dia.
4
Magazine lever
5
Magazine
6
trigger lock
7
22 GB/Mt
Keep the tacker out of the
reach of children!
trigger lock
Dispose packaging and appliance in
an environmentally-friendly way!
Lower stop
8
Knurled screw
9
Upper stop
10

Included items

Q
1 x Compressed air tacker
1 x Carrying case
1 x Compressed air special oil
1 x threaded plug-in nipple, ¼'' ext. dia.
(factory fitted)
1 x Pack of nails, 1000 No.
1 x Pack of staples, 1000 No.
1 x Safety glasses
1 x Allen key, 3 mm
1 x Allen key, 4 mm
1 x Operating instructions

technical data

Q
Working pressure:
Magazine capacity:
Nail length:
Staple length:
Staple width:
Recommended
hose diameter:
Compressed air quality: cleaned, oiled and
noise and vibration data:
the measured values are determined in accord-
ance with EN 12549:1999, EN ISO 4871. the
A-weighted sound pressure level of the device is
typically 85.7 dB (A). Uncertainty K = 3 dB. the
max. 7 bar
100 No.
15 - 32 mm
16 - 32 mm
5.7 mm
Ø 9 mm
condensate-free