Maintenance And Cleaning - Westfalia BMH 900 Bedienungsanleitung

For Hammer Drilling
Set the drill selection switch (5) to the drill and hammer drill
symbol
 For Drilling
Set the drill selection switch (5) to the hammer drill symbol
and set the lever (8) to the drill symbol .
 For Chiselling
Set the drill selection switch (5) to the hammer symbol
set the lever (8) to the hammer drill symbol
 For Setting the Position of the Chisel
Set the drill selection switch (5) to the hammer symbol
the directional arrow
irrelevant.
 No function is linked to the combination drill selection
switch (5) to the hammer symbol
drill symbol
position, the machine may be damaged!

Maintenance and Cleaning

 Always keep the machine clean, dry and free from oil.
 Use only a dry or slightly moist cloth for cleaning the housing.
 Do not use abrasives or flammable substances such as
benzene, solvents, turpentine or similar.
 Keep the ventilation louvers clean and free from obstructions
to prevent overheating the machine.
 If the hammer function deteriorates, suitable gear grease
should be added to the gear box. Open the gear box cover
and set the laver (8) to the hammer drill symbol
! Do not operate the machine in this
Operation
. The Position of the lever (8) is
17
.
and lever (8) to the
.
and
with