Specifications - Makita BST220 Bedienungsanleitung

ENGLISH (Original instructions)
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Trigger
2-2. Safety lever
3-1. Sub magazine
3-2. Locking lever
4-1. Staples

SPECIFICATIONS

Applicable staples length
Staple magazine capacity
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for pressing staples into construction
materials such as timbers.
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
Explanation of general view
4-2. Main magazine
5-1. Sub magazine
5-2. Locking lever
6-1. Sub magazine
6-2. Locking lever
7-1. Groove
7-2. Hook
7-3. Screw
Model
Staple width
Overall length
Net weight
Rated voltage
) : 82 dB(A)
pA
) : 93 dB(A)
WA
2
) : 3.5 m/s
h
2
BST220
10 mm
10 mm - 22 mm
84 pcs
247 mm
2.3 kg
D.C. 14.4 V
ENE054-1
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
ENG905-1
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
For European countries only
EC Declaration of Conformity
We Makita
manufacturer declare that the following Makita
machine(s):
ENG900-1
Designation of Machine:
Cordless Stapler
Model No./ Type: BST220,BST221
are of series production and
Conforms to the following European Directives:
2006/42/EC
ENG901-1
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd.
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
3
9-1. Nut
10-1. Front
10-2. Workpiece
10-3. Rear
12-1. Sight window
13-1. Sub magazine
13-2. Locking lever
BST221
10 mm - 22 mm
251 mm
D.C. 18 V
Corporation as the
10 mm
84 pcs
2.4 kg
ENH101-15
responsible