When Installing The Aerial Inside The Vehicle (On The Dashboard Or Rear Shelf) - Pioneer ANH-P9R-BK Installationsanleitung

Installation

When installing the aerial inside the vehicle (on the dashboard or rear shelf)

(Fig. 11)
Affix the metal sheet on as level a surface as possible where the GPS aerial faces outside the window.
Place the GPS aerial on the metal sheet. (The GPS aerial is fastened with its magnet.)
Notes
• When attaching the metal sheet, do not cut it into small pieces.
• Some models use window glass that does not allow signals from GPS satellites to pass through.
On such models, install the GPS aerial on the outside of the vehicle.
All manuals and user guides at all-guides.com
GPS aerial
Metal Sheet
Peel off the protective sheet
on the rear.
Make sure the surface is
free of moisture, dust,
grime, oil, etc., before
affixing the metal sheet.
Note
The metal sheet contains
a strong adhesive and may
leave a mark on the dashboard
if it is removed.
Clamps
Use clamps to secure the
lead where necessary inside
the vehicle.
Fig. 11
En 17