Installing The Wall Mounting Bracket; Appliance Installation - AEG WKL 753 S/U Bedienungs Und Installationsanleitung Handbuch

9.2

Installing the wall mounting bracket

You can also use the wall mounting bracket as a template for wall mounting; this ensures the required floor clearance.
» Unhook the wall mounting bracket.
» Place the centred wall mounting bracket level on the ground and mark holes 1 and 2.
» Lift up the wall mounting bracket so that its lower holes match up with the markings you have just made on the ins-
tallation wall.
» Mark holes 3 and 4 on the installation wall.
1
a a a
» Drill holes at all four markings. Secure the wall mounting bracket with suitable materials (screws, rawl plugs) depen-
ding on the type of wall. With the vertical slots, you can compensate for an offset fixing hole.
9.3

Appliance installation

» Hook the appliance by its slots in the back of the appliance on to all four tabs of the wall mounting bracket
simultaneously.
» Push the appliance to latch it in position.
» Turn the locking bolt in the wall mounting bracket fully clockwise; this locks the appliance in place.
» Push the safety cap onto the locking bolt to prevent it from loosening.
1 Locking bolt
2 Wall mounting bracket
3
2
1
2
4
Installation
21