Herunterladen Inhalt Inhalt Diese Seite drucken

Märklin H0 BR 1020 MWB Bedienungsanleitung Seite 6

Inhaltsverzeichnis

Werbung

Function
• Possible operating systems:
6646/6647 Märklin Transformer, Märklin Delta, Märklin
Digital, Märklin Systems.
• Recognition of the mode of operation: automatic.
• Addresses that can be set (Control Unit): 01 – 80.
Address set at the factory: 19.
• Mfx technology for the Mobile Station / Central Station.
Name set at the factory: 1020 041-8 MWB
• Headlights change over with the direction of travel.
• Adjustable acceleration/Braking delay (ABV).
• Adjustable maximum speed.
• Setting the locomotive parameters electronically with
the Control Unit, Mobile Station or Central Station.
Safety Warnings
• This locomotive is to be used only with an operating
system designed for it (Märklin 6646/6647 AC transfor-
mer, Märklin Delta, Märklin Digital or Märklin Systems).
Under no circumstances should a transformer rated for
an input voltage of 220 volts be used for the 110 volts
system in North America.
• This locomotive must never be supplied with power
from more than one transformer.
• Pay close attention to the safety warnings in the
instructions for your operating system.
6
All manuals and user guides at all-guides.com
• The feeder track must be equipped to prevent inter-
The interference suppression set is not suitable for digital
operation.The maintenance work necessary with normal
operation of this locomotive is described below. Please
see your authorized Märklin dealer for repairs or spare
parts.
No warranty or damage claims shall be accepted in those cases
where parts neither manufactured nor approved by Märklin have
been installed in Märklin products or where Märklin products have
been converted in such a way that the non-Märklin parts or the
conversion were causal to the defects and / or damage arising. The
burden of presenting evidence and the burden of proof thereof,
that the installation of non-Märklin parts or the conversion in or of
Märklin products was not causal to the defects and / or damage
arising, is borne by the person and / or company responsible for
the installation and / or conversion, or by the customer.
ference with radio and television reception, when the
locomotive is to be run in conventional operation. The
74046 interference suppression set is to be used for this
purpose.

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

H0 37224H0 br 1020 der mwb37224

Inhaltsverzeichnis