Twist Ice Maker; How To Make Ice Cubes - Bauknecht GKN ECO 18 A XL Bedienungsanleitung

TWIST ICE MAKER*

HOW TO MAKE ICE CUBES

You can remove the complete Twist Ice Maker (press
and hold (1) the leveler on the left and push it (2)
towards you) or you can just remove the ice cube tray
by pulling it (3) towards you.
Fill the tray with potable water (maximum level = 2/3
of the overall capacity).
Place again the Twist Ice Maker in its seat, or reinsert
the ice cube tray within the Twist Ice Maker. Take care
not to spill water.
Wait until the ice cubes are formed (it is
recommended to wait for about 4 hours, with the
Fast Freeze option active).
NOTE: Twist Ice Maker is removable. It can be placed
in horizontal position anywhere in the freezer
compartment or taken out of the appliance when ice-
making is not required.
* available on selected models only.
All manuals and user guides at all-guides.com
or
or
HOW TO TAKE ICE CUBES
1. Make sure that the storage bin is in place under
the ice tray. If not, slide into place.
2. Twist one of levers firmly in the clockwise
direction until the tray twists slightly. The ice
cubes fall into the storage bin.
3. Repeat Step 2 for the other half of the tray, if
necessary. You can make ice cubes (see the
chapter "HOW TO MAKE ICE CUBES") and store
them in the storage bin and pull it towards you.
4. To get ice, slightly lift up the storage bin and pull
it towards you.
NOTE: if you prefer, you can remove the entire Twist
Ice Maker from the appliance, to take the ice cubes
wherever is convenient for you (for example: directly
on the table).
24
or