Herunterladen Inhalt Inhalt Diese Seite drucken

Overheating Protection; Troubleshooting - Parkside PKH 2000 B1 Bedienungs- Und Sicherheitshinweise

Keramik-heizgebläse
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
˜ Overheating protection
The product is equipped with overheating
 
protection . If the product overheats, the
heating element will turn off automatically .
However, the fan continues to run so that rapid
cooling is achieved . The product will turn on
again automatically once it has cooled down
properly .
WARNING! There is usually a reason for
m
overheating! It can indicate a fire hazard!
Check whether the product is giving off
 
sufficient heat:
Is the product covered or is it too close to a
wall or other obstruction?
Is the grid blocked in the front or at the
back?
Is the fan blocked?
Rectify the problem if possible, or contact the
 
service hotline (see the section "Service") .
30 GB/IE
˜ Troubleshooting
Problem
Cause
The power
plug 
7 ]
[
connected .
The product
cannot be
The socket-
turned on .
outlet does not
deliver any
voltage .
The heating
level switch 
is not turned
on .
The product
The
does not heat
temperature
up .
control 
is set to the
lowest position .
The heating
element is
defective .
Solution
Connect the
power plug 
[
7 ]
is not
to a socket-
outlet .
Check the
house fuses .
Set the heating
level switch 
4 ]
[
[
4 ]
to the desired
operation
mode .
Set the
temperature
control 
to
[
3 ]
3 ]
[
the highest
position .
Notify the
customer
service .

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis