Cleaning And Storage; Set-Up Location - Parkside PKH 2000 B1 Bedienungs- Und Sicherheitshinweise

Do not operate the product with
wet hands or while standing on
a wet floor . Do not touch the
power plug with wet hands .
Do not use the product in very
humid environments .
Always turn off the product
before disconnecting it from the
power supply .
Do not unplug the product by
pulling on the power cord . Do
not wrap the power cord around
the product .
Make sure that the details on
the rating label are in conformity
with your mains voltage .
Only connect the product to
alternating current with an
earthing contact as otherwise a
protection against electric shock
is not provided .
In the event of malfunctions,
remove the mains plug from the
mains socket .
28 GB/IE

Cleaning and storage

Disconnect the product from the
wall outlet during periods of
disuse and before cleaning .
Instructions on cleaning the
product: see "Cleaning and
care" .
Store the product in a cool, dry
place protected from sunlight
and out of the reach of children .
˜ Before first use
Remove the packing materials .
Check the product for any damages .
NOTE: The product may give off some
vapours or odours during first use . These are
production or transport residue that will quickly
subside . There may also be quiet noises such
as clicking or crackling . These will also quickly
subside once the plastic parts have finally
adjusted to the operating conditions .
˜ Operation
˜ Set-up location
Place the product on an even, stable surface .
Maintain the following clearances around the
product:
– 30 cm to the left, right, top, and rear
– 100 cm to the front