Display Setting - Yamaha BD-A1060 Bedienungsanleitung

■ Display Setting

The default settings are marked with "
TV
3D Output
You can select 3D or 2D video output from this Player.
Auto* This Player automatically selects 3D or 2D videos.
Off This Player always selects 2D videos.
Note
– Even if you set "3D Output" to "Auto" and play
back a Blu-ray 3D Disc, this Player selects 2D
images depending on the setting of TV, etc.
TV Screen
You can set the screen aspect ratio of the connected TV,
and adjust the video output.
If you switch your TV (i.e. because you have bought a
new one) and the screen aspect ratio of the connected TV
changes, you will have to change the TV Screen setting.
16:9 Full Select this when this Player is connected to a TV
with a 16:9 screen. When a 4:3 aspect ratio video is
played back, the video is displayed as shown below.
16:9 Normal * Select this when this Player is connected to a TV
with a 16:9 screen. When a 4:3 aspect ratio video is
played back, the video is displayed as shown below.
4:3 Pan Scan Select this when this Player is connected to a TV
with a 4:3 screen. When a 16:9 aspect ratio video is
played back, the video is displayed as shown below.
4:3 Letter Box Select this when this Player is connected to a TV
with a 4:3 screen. When a 16:9 aspect ratio video is
played back, the video is displayed as shown below.
On 16:9 (wide screen) TV
Original
image size
16:9 Full
4:3
Original
image size
4:3 Pan Scan
16:9
4K Upscaling
Enables/disables 4K upscaling for HDMI video output.
When set to on, you can set "HDMI Resolution" to "4K".
On*, Off
* ".
16:9 Normal
On 4:3 TV
4:3 Letter Box
HDMI Resolution
You can select the HDMI video output resolution. For
more details on output formats, refer to "Video output
formats" (p. 43).
When set to Auto, resolution is set to the maximum
resolution according to the connected TV.
When set to Disc Native, the original resolution and video
frequency, recorded in the Blu-ray Disc or DVD that is
played back, are used. You can use a video up-converter
function of an external device.
When other than a Blu-ray Disc or DVD is played back,
the resolution and video frequency will work as Auto.
If a Blu-ray Disc or DVD whose resolution and video
frequency are not compatible with the connected TV, no
image will be output. In this case, stop playback, and
select an option other than Disc Native.
Auto * , Disc Native, 4K, 480i/576i, 480p/576p, 720p, 1080i,
1080p
Notes
– To output HD audio (Dolby TrueHD or DTS-HD
Master Audio) from HDMI terminal, set HDMI
Resolution to Auto or more than 720p.
– 4K is available only when 4K Upscaling is set to On.
– Auto is automatically selected when 4K Upscaling is
set to Off while HDMI Resolution is set to 4K.
TV System
You can select TV System from PAL, NTSC and Multi.
Set the same TV System as your TV set. For more details
on output formats, refer to "Video output formats" (p. 43).
NTSC, PAL, Multi
(The default setting differs depending on your model.)
Color Space
You can select the Color Space (p. 50) output from
HDMI. This function is available when this Player is
connected with an HDMI cable.
* Sets Color Space to YCbCr 4:4:4.
YCbCr 4:4:4
YCbCr 4:2:2 Sets Color Space to YCbCr 4:2:2.
Full RGB When RGB is set and white and black on the screen
are too faint, select this item. This setting is effective
when a connected component supports RGB 0–255
range.
RGB Outputs video signal at normal signal range.
Note
– This function is only available on TVs that support
this function.
HDMI Deep Color
When your TV and/or AV receiver is compatible with
Deep Color (p. 50), set this item according to your TV/AV
receiver. This function is available when this Player is
connected with an HDMI cable.
*
30 bits, 36 bits, Off
SETUP menu
4
39
En