Installing The Virtual Guard - Samsung POWERbot SR20H9050U Serie Benutzerhandbuch

installing the Virtual guard

infrared ray from the Virtual guard will restrict poWerbot from approaching certain
area.
The distance of virtual wall is 2.5 m at minimum and may differ
depending on surroundings and movement status of POWERbot.
1
press the power
button to turn it on
Power lamp (Red) will blink.
2
install the Virtual guard
where you want to restrict
poWerbot's entrance
Make sure that distance sensor is facing
at the desired direction you want to
create a invisible barrier (which will restrict
POWERbot's approach).
ENGLISH-12
Virtual guard