Changing Tools; Speed Gearbox; Torque Selection Ring/Drill Setting; Operation - Parkside PABS 12 B2 Betriebsanleitung

Changing tools

Your cordless drill has a fully automatic spindle
lock
.
When the motor is stopped, the power train locks
so that the quick-release chuck
by turning it . Once you have attached the
desired tool and tightened it by turning the chuck
, you can continue working. The spindle lock is
automatically released when the motor starts (ON/
OFF switch pressed).

2 speed gearbox

CAUTION!
► Operate the speed selection switch
when the appliance is at a standstill. Other-
wise the appliance can be damaged.
In first gear (speed selector switch
tion: 1)
you can reach a speed of approx. 350 rpm and a
high torque. This setting is suitable for all screwing
jobs.
In second gear (speed selector switch
position: 2)
you can reach a speed of approx. 1300 rpm for
carrying out drilling work.

Torque selection ring/drill setting

You can set the torque using the torque selection
ring .
♦ Select a low level for small screws or soft
materials.
♦ Select a high level for large screws, hard
materials or removing screws.
♦ Select the drill setting for drilling work by ad-
justing the torque selection ring
position .
♦ Push the speed selector
work (position: 2).
PABS 12 B2
can be opened
only
in posi-
in
to the
to the rear for drilling

Operation

Change direction of rotation/unlock
appliance
♦ Unlock the appliance and change the direction
of rotation by pressing the rotation direction
switch towards the left or right.
Switching on and off
Switching on:
♦ To start the appliance, press the ON/OFF
switch and keep it pressed in. The LED work
light lights up when the ON/OFF switch
is depressed lightly or fully. This allows for illumi-
nation of the work area in low lighting.
Switching off:
♦ Release the appliance's ON/OFF switch
switch off the appliance.

Adjusting the rotational speed

The ON/OFF switch
control. Pressing the ON/OFF switch
yields a low speed. Increasing pressure increases
the speed.
NOTE
► The integrated motor brake ensures rapid
stoppage.

Activate lock

♦ Push the rotation direction switch
middle position. The ON/OFF switch
blocked.
has a variable speed
lightly
into the
is
GB│ 31
to
■